mirror/galene
1
Fork 0
mirror of https://github.com/jech/galene.git synced 2024-11-09 18:25:58 +01:00
Code Activity

Tweaks to README.

Browse source 
Fixes the instructions for compling under Windows.
This commit is contained in:
Juliusz Chroboczek 2021-07-04 15:07:12 +02:00
parent 6143f53ca2
commit 3398e929e3
1 changed files with 12 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

23
README
View file

@ -9,7 +9,7 @@ You will need Go 1.13 or later (type `go version`). Then do:
On Windows, do
set CGO_ENABLED=0
go build -ldflags='-s -w'
go build -ldflags="-s -w"
## Set the server administrator credentials
@ -69,13 +69,14 @@ should also allow UDP traffic to the TURN port, and UDP traffic to
ephemeral (high-numbered) ports (or whatever is configured using the
`-udp-range` option).
If your server is behind NAT, then the NAT must forward, at the very
least, port 8443 to your server. Ideally, you should configure an
external TURN server (see *ICE Servers* below) on a host that is not
behind NAT. If that is not possible, then you should forward port 1194 in
addition to port 8443, and you should add the option `-turn 203.0.113.1:1194`
to Galène's command line, where `203.0.113.1` is your NAT's external
(global) IPv4 address.
If your server is behind NAT (which is not recommended), then the NAT must
forward, at the very least, port 8443 to your server. Ideally, you should
configure an external TURN server (see *ICE Servers* below) on a host that
is not behind NAT. If that is not possible, then you must use a NAT that
supports hairpinning, you must forward port 1194 in addition to port 8443,
and you will need to add add the option `-turn 203.0.113.1:1194` to
Galène's command line, where `203.0.113.1` is your NAT's external (global)
IPv4 address.
## Cross-compile for your server
@ -95,7 +96,7 @@ For a BeagleBone or a Raspberry Pi 2 or later:
CGO_ENABLED=0 GOOS=linux GOARCH=arm GOARM=7 go build -ldflags='-s -w'
For a 64-bit ARM board (Olimex Olinuxino-A64, Pine64, etc.):
For a 64-bit ARM board (Olimex Olinuxino-A64, Pine64, etc.) or server:
CGO_ENABLED=0 GOOS=linux GOARCH=arm64 go build -ldflags='-s -w'
@ -116,7 +117,7 @@ a certificate, install it in the files `data/cert.pem` and `data/key.pem`:
ssh galene@server.example.org
sudo cp /etc/letsencrypt/live/server.example.org/fullchain.pem data/cert.pem
sudo cp /etc/letsencrypt/live/server.example.org/key.pem data/key.pem
sudo cp /etc/letsencrypt/live/server.example.org/privkey.pem data/key.pem
sudo chown galene:galene data/*.pem
sudo chmod go-rw data/key.pem
@ -332,7 +333,7 @@ If you prefer to use coturn's `use-auth-secret` option, then the
[
{
"Urls": [
"urls": [
"turn:turn.example.com:443",
"turn:turn.example.com:443?transport=tcp"
],