Literature review; change to file layout

biblio/bibliography_research.tex

@@ -0,0 +1,58 @@
+\chapter{Bibliography research}
+\section{Extracting components from buoy data}
+\paragraph{incident and reflected wave separation}
+\cite{mansard1980measurement}: extract incident and reflected spectra from
+spectrum measurements at three different points.
+\cite{suh2001separation,frigaard1995time,baldock1999separation,
+roge2019estimation,andersen2017estimation}
+
+\paragraph{incident and reflected wave separation single gauge}
+\paragraph{incident and reflected wave separation puv method}
+Probablement très intéressant: \cite{inch2016accurate}:
+\cite{sheremet2002observations,guza1977resonant}
+Très bien: \cite{huntley1999use,tatavarti1989incoming}
+
+\cite{pedersen2007resolving}
+\paragraph{puv method}
+\cite{sobey1999locally}
+\paragraph{artha breakwater reflection}
+\cite{poncet2020wave,larroque2018situ}
+
+\section{Reflection}
+\paragraph{wave reflection analysis}
+\cite{davidson1996new}
+
+\section{Modeling wave impact on porous media}
+\paragraph{olaFlow}
+\cite{olaFlow,higuera2015application}: \cite{bogdanov2011direct,del2011three}
+
+\section{Breakwater modeling}
+\paragraph{modelling breakwater} sph: \cite{altomare2014numerical};
+
+\paragraph{rubble-mound breakwater model} \cite{vanneste20152d,
+sumer2000experimental,kim2005neural,troch1999development,koley2020numerical,
+losada1979joint,lara2008wave,losada2008numerical}
+
+\paragraph{breakwater model} \cite{hsu2002}
+
+\section{Modeling}
+\paragraph{using wave buoy data in numerical models} \cite{thomas2015,
+mentaschi2013,rusu2011}
+
+\section{Block displacement}
+\paragraph{boulder transport by waves} \cite{erdmann2018boulder,may2015block,
+weiss2012mystery,weiss2015untangling,zainali2015boulder,zainali2016high}
+\paragraph{boulder transport flow} \cite{nandasena2011reassessment,
+nandasena2013boulder,martinez2011quasi,kennedy2016observations,lodhi2020role,
+oetjen2021experiments,oetjen2020significance}
+\paragraph{storm waves boulder interaction} \cite{nandasena2011numerical}
+Très intéressant: \cite{weiss2017toward},
+\cite{sheremet2002observations,sheremet2016triads}
+\paragraph{block transport by waves} \cite{imamura2008numerical,
+barbano2010large,PARIS20111,biolchi2016}
+
+\section{Other}
+\cite{miche1951}
+
+\section{Flow in porous media}
+\paragraph{wave flow porous media} \cite{SHAO2010304}

biblio/introduction.tex

@@ -0,0 +1,21 @@
+\chapter{Introduction}
+In February 2017, a \SI{50}{\tonne} concrete block was displaced by a wave onto
+the Artha breakwater in Saint-Jean-de-Luz. This event was captured by a
+photographer, and earlier work from \textcite{amir} allowed to extract the
+conditions under which this event happened using field data along with
+numerical modeling.
+
+The goal of the present study is to establish a numerical model representing
+the conditions under which this block displacement event happened at the scale
+of the breakwater. The simulation will be performed using the olaFlow
+\parencite{olaFlow} model in a three-dimensionnal setting.
+
+This study presents several aspects that are crucial to consider in order to
+obtain accurate results. The seastate that lead to the studied event is known
+thanks to a wave buoy located in front of the breakwater \parencite{amir}.
+However, in order to input an accurate incident wave into the numerical model,
+it will be necessary to extract the incident and reflected waves from the raw
+buoy data. Then, it will be necessary to accurately model the Artha breakwater,
+especially regarding its porous character. Finally, the results of this
+simulation will need to be compared to the literature on block displacement by
+waves for validation.

biblio/library.bib

@@ -624,3 +624,73 @@
 	issue = {1},
 	doi = {10.51400/2709-6998.2138},
 }
+
+@inbook{gaillard1980,
+	author = {Pierre Gaillard  and Michel Gauthier  and Forrest Holly },
+	title = {Method of Analysis of Random Wave Experiments with Reflecting Coastal Structures},
+	year = {1980},
+	booktitle = {Coastal Engineering 1980},
+	pages = {204-220},
+	doi = {10.1061/9780872622647.011},
+	URL = {https://ascelibrary.org/doi/abs/10.1061/9780872622647.011},
+	eprint = {https://ascelibrary.org/doi/pdf/10.1061/9780872622647.011},
+}
+
+@inbook{guza1984,
+	author = {R. T. Guza  and E. B. Thornton  and R. A. Holman },
+	title = {Swash on Steep and Shallow Beaches},
+	booktitle = {Coastal Engineering 1984},
+	chapter = {},
+	year = {1984},
+	pages = {708-723},
+	doi = {10.1061/9780872624382.049},
+	URL = {https://ascelibrary.org/doi/abs/10.1061/9780872624382.049},
+	eprint = {https://ascelibrary.org/doi/pdf/10.1061/9780872624382.049},
+}
+
+@inbook{kubota1990,
+	author = {Susumu Kubota  and Masaru Mizuguchi  and Mitsuo Takezawa },
+	title = {Reflection from Swash Zone on Natural Beaches},
+	booktitle = {Coastal Engineering 1990},
+	year = {1990},
+	chapter = {},
+	pages = {570-583},
+	doi = {10.1061/9780872627765.046},
+	URL = {https://ascelibrary.org/doi/abs/10.1061/9780872627765.046},
+	eprint = {https://ascelibrary.org/doi/pdf/10.1061/9780872627765.046},
+}
+
+@article{walton1992,
+	title = {Wave reflection from natural beaches},
+	journal = {Ocean Engineering},
+	volume = {19},
+	number = {3},
+	pages = {239-258},
+	year = {1992},
+	issn = {0029-8018},
+	doi = {https://doi.org/10.1016/0029-8018(92)90027-2},
+	url = {https://www.sciencedirect.com/science/article/pii/0029801892900272},
+	author = {T.L. Walton},
+}
+
+@article{hughes1993,
+	title = {Laboratory wave reflection analysis using co-located gages},
+	journal = {Coastal Engineering},
+	volume = {20},
+	number = {3},
+	pages = {223-247},
+	year = {1993},
+	issn = {0378-3839},
+	doi = {https://doi.org/10.1016/0378-3839(93)90003-Q},
+	url = {https://www.sciencedirect.com/science/article/pii/037838399390003Q},
+	author = {Steven A. Hughes},
+}
+
+@report{miche1951,
+	title = {Le pouvoir réfléchissant des ouvrages maritimes exposés à l'action
+		de la houle},
+	author = {Miche, M.},
+	year = {1951},
+	publisher = {École nationale des ponts et chaussées},
+	booktitle = {Hydraulic Engineering Reports},
+}

biblio/literature.tex

@@ -0,0 +1,72 @@
+\chapter{Literature Review}
+In this chapter, literature relevant to the present study will be reviewed.
+
+\section{Separating incident and reflected components from wave buoy data}
+
+The separation of incident and reflected waves is a crucial step in numerically
+modeling a seastate. Using the raw data from a buoy as the input of a wave
+model will lead to incorrect results in the domain as the flow velocity at the
+boundary will not be correctly generated.
+
+Several methods exist to extract reflected components in measured seastates,
+and they can generally be categorised in two types of methods: array methods
+and PUV methods \parencite{inch2016accurate}. Array methods rely on the use of
+multiple measurement points of water level to extracted the incident and
+reflected waves, while PUV methods use colocated pressure and velocity
+measurements to separate incident and reflected components of the signal.
+
+\subsection{Array methods}
+\begin{itemize}
+	\item \cite{mansard1980measurement}: Presentation of least-square method to separate
+incident and reflected spectra. Requires simultaneous measurement at 3
+positions, on a line parallel to the direction of wave propagation.
+\parencite{gaillard1980}
+
+	\item \cite{frigaard1995time}: Separate 2D wave field into waves propagating towards
+and away from a structure, using 2 gauges. Method quite efficient, even with
+small filters. SIRW Method, realtime.
+
+	\item \cite{baldock1999separation}: Starting from \textcite{frigaard1995time},
+arbitrary 2D bathymetry using linear shoaling. Small error for large reflection
+coefficients, larger for low reflection.
+
+	\item \cite{suh2001separation}: Technique to separate incident and reflected waves on
+a known current.
+
+	\item \cite{inch2016accurate}: creation of a lookup table to correct noise-induced
+bias in array methods.
+
+	\item \cite{andersen2017estimation}: estimation of incident and reflected components
+for non-linear waves.
+
+	\item \cite{roge2019estimation}: extension to irregular waves.
+\end{itemize}
+
+\subsection{PUV methods}
+
+\begin{itemize}
+	\item ?? \cite{guza1977resonant}: model of the surf zone as a standing wave combined
+with a progressive wave. Accurate results of surface elevation and runup for
+reflectivities over 0.3.
+
+	\item ?? \cite{guza1984}: 
+
+	\item \cite{tatavarti1989incoming}: Decompose colocated random field
+		measurements of wave elevation and currenct velocity into incoming and
+		outgoing components. Less sensitive to noise.
+
+	\item \cite{kubota1990}: comparison between different wave theories:
+		quasi-nonlinear long-wave theory gave the best results.
+
+	\item \cite{walton1992}: application to beaches, possibility to have higher
+	reflected energy than incident energy.
+
+	\item \cite{hughes1993}: colocated horizontal and vertical velocities or
+	horizontal velocity and surface elevation. Validation for full reflection of
+	irregular non breaking waves.
+
+	\item \cite{huntley1999use}: principal component analysis technique to avoid
+	noise-induced bias.
+
+	\item \cite{sheremet2002observations}:
+\end{itemize}

biblio/main.tex

@@ -1,4 +1,4 @@
-\documentclass[english, a4paper, 11pt]{report}
+\documentclass[english, a4paper, 11pt]{book}
 \usepackage{cours}
 \setmainlanguage{english}
 
@@ -27,91 +27,17 @@ at the Artha breakwater on February 28, 2017}
 \date{February 2022}
 
 \begin{document}
+\frontmatter
 \maketitle
 
-\chapter*{Bibliography research}
+\tableofcontents
-\section{Extracting components from buoy data}
-\paragraph{incident and reflected wave separation}
-\cite{mansard1980measurement}: extract incident and reflected spectra from
-spectrum measurements at three different points.
-\cite{suh2001separation,frigaard1995time,baldock1999separation,
-roge2019estimation,andersen2017estimation}
 
-\paragraph{incident and reflected wave separation single gauge}
+\mainmatter
-\paragraph{incident and reflected wave separation puv method}
+\include{bibliography_research}
-Probablement très intéressant: \cite{inch2016accurate}:
+\include{introduction}
-\cite{sheremet2002observations,guza1977resonant}
+\include{literature}
-Très bien: \cite{huntley1999use,tatavarti1989incoming}
-
-\cite{pedersen2007resolving}
-\paragraph{puv method}
-\cite{sobey1999locally}
-\paragraph{artha breakwater reflection}
-\cite{poncet2020wave,larroque2018situ}
-
-\section{Reflection}
-\paragraph{wave reflection analysis}
-\cite{davidson1996new}
-
-\section{Modeling wave impact on porous media}
-\paragraph{olaFlow}
-\cite{olaFlow,higuera2015application}: \cite{bogdanov2011direct,del2011three}
-
-\section{Breakwater modeling}
-\paragraph{modelling breakwater} sph: \cite{altomare2014numerical};
-
-\paragraph{rubble-mound breakwater model} \cite{vanneste20152d,
-sumer2000experimental,kim2005neural,troch1999development,koley2020numerical,
-losada1979joint,lara2008wave,losada2008numerical}
-
-\paragraph{breakwater model} \cite{hsu2002}
-
-\section{Modeling}
-\paragraph{using wave buoy data in numerical models} \cite{thomas2015,
-mentaschi2013,rusu2011}
-
-\section{Block displacement}
-\paragraph{boulder transport by waves} \cite{erdmann2018boulder,may2015block,
-weiss2012mystery,weiss2015untangling,zainali2015boulder,zainali2016high}
-\paragraph{boulder transport flow} \cite{nandasena2011reassessment,
-nandasena2013boulder,martinez2011quasi,kennedy2016observations,lodhi2020role,
-oetjen2021experiments,oetjen2020significance}
-\paragraph{storm waves boulder interaction} \cite{nandasena2011numerical}
-Très intéressant: \cite{weiss2017toward},
-\cite{sheremet2002observations,sheremet2016triads}
-\paragraph{block transport by waves} \cite{imamura2008numerical,
-barbano2010large,PARIS20111,biolchi2016}
-
-\section{Flow in porous media}
-\paragraph{wave flow porous media} \cite{SHAO2010304}
-
-\chapter{Introduction}
-In February 2017, a \SI{50}{\tonne} concrete block was displaced by a wave onto
-the Artha breakwater in Saint-Jean-de-Luz. This event was captured by a
-photographer, and earlier work from \textcite{amir} allowed to extract the
-conditions under which this event happened using field data along with
-numerical modeling.
-
-The goal of the present study is to establish a numerical model representing
-the conditions under which this block displacement event happened at the scale
-of the breakwater. The simulation will be performed using the olaFlow
-\parencite{olaFlow} model in a three-dimensionnal setting.
-
-This study presents several aspects that are crucial to consider in order to
-obtain accurate results. The seastate that lead to the studied event is known
-thanks to a wave buoy located in front of the breakwater \parencite{amir}.
-However, in order to input an accurate incident wave into the numerical model,
-it will be necessary to extract the incident and reflected waves from the raw
-buoy data. Then, it will be necessary to accurately model the Artha breakwater,
-especially regarding its porous character. Finally, the results of this
-simulation will need to be compared to the literature on block displacement by
-waves for validation.
-
-\chapter{Literature Review}
-In this chapter, literature relevant to the present study will be reviewed.
-
-\section{Separating incident and reflected components from wave buoy data}
 
+\backmatter
 \nocite{*}
 \printbibliography
 \end{document}